Add Channels

Sometimes channels don’t automatically appear on your channel list and you have to add them manually.

SKY / SKY+ STANDARD DEFINITION SET-TOP BOXES
To add new channels to your “Other Channels” section on your standard Sky or Sky+ Digibox then simply do the following….

· Press the “SERVICES” button (near the top of the remote).
· Highlight “SYSTEM SET-UP”, press “SELECT” and then scroll down to “ADD CHANNELS” and press “SELECT”.
· In the appropriate fields enter the information required. To move through the fields simply press the “UP ARROW” and “DOWN ARROW” keys.

· In the FREQUENCY field enter the 5 digit code, (it starts with either 10, 11 or 12 in the table below). Don’t worry about the full stop in the frequencies in the table below, you do not have to enter them on Sky set-top boxes.

· The next three fields are toggle fields, i.e. you use the “LEFT ARROW” and “RIGHT ARROW” keys to change the values.

Polarisation – either H or V
Symbol Rate – either 22000 or 27500
FEC – either 2/3, 5/6 or 7/8

· Once you have entered all the required information, scroll down to “FIND CHANNEL” and press “SELECT” to scan for the channels and in a few moments it should pop up, along with other channels on the same frequency.

· Use the “YELLOW” button to place a tick beside each channel you find and wish to store and when you’ve finished ticking press “SELECT”. These channels will now be stored in your “OTHER CHANNELS” menu. (Press “SERVICES” then highlight the “OTHER CHANNELS” option and press “SELECT”).

SKY+ HD SET-TOP BOXES
To add new channels to your “Other Channels” section on your Sky+HD Digibox then simply do the following….

· Press the “SERVICES” button on your remote and then keep pressing the “LEFT ARROW” until you see “OPTIONS” highlighted.

· Now press the “DOWN ARROW” on your remote and on the middle menu keep pressing the “LEFT ARROW” until you see “ADD CHANNELS” highlighted.

· Now, press the “DOWN ARROW” again and a few boxes will show up at the bottom which you have to enter details into.

· In the appropriate fields enter the information required. To move through the fields simply press the “UP ARROW” and “DOWN ARROW” keys.

· In the FREQUENCY field enter the 5 digit code, (it starts with either 10, 11 or 12 in the table below). Don’t worry about the full stop in the frequencies in the table below, you do not have to enter them on any Sky / Sky+ / Sky+HD set-top boxes.

· The next three fields are toggle fields, i.e. you use the “LEFT ARROW” and “RIGHT ARROW” keys to change the values.

Polarisation – either H or V
Symbol Rate – either 22000 or 27500 **
FEC – either 2/3, 5/6 or 7/8

 

Sky HD Solutions

IPTV, VPN, Sky boxes, Sky cards.
Europe's premier suppliers.
Visit our online shop for the best products at the best prices and unbeatable service. Click 'Shop' above.
Our emergency service is available from 8am until 10pm 7 days a week, 365 days a year.